I installed the TBS Flash and plugged in the USB DasMikro Programmer. I opened the application but I can't connect the USB Programmer to the Com Port. The Device manager shows the USB Device using the Com 5 Port but won't connect when the Com 5 Port is selected and the Device Driver is installed.
A
Answer by
Ashish Bajaj
It sounds like you are experiencing a connection issue between the TBS Flash application and the USB DasMikro Programmer via the COM port. Here are a few steps to troubleshoot the problem:
Ensure Proper Installation: Double-check that the TBS Flash software and the USB drivers for the DasMikro Programmer have been installed correctly. Sometimes a fresh installation may resolve connectivity issues.
Verify Device Manager Settings: Make sure the COM port number in Device Manager matches the one you're trying to connect to in the TBS Flash application. You could try changing the COM port number in Device Manager to see if that helps establish a connection.
Check for Conflicts: Ensure no other devices or applications are using the same COM port. Conflicts can prevent the software from establishing a connection.
Update Drivers: Search for any available updates for your USB driver and install the latest version.
Administrator Privileges: Run the TBS Flash application as an administrator to ensure it has the necessary permissions to access hardware components.
Try Another USB Port: Sometimes the issue might relate to the USB port itself. Try connecting the USB DasMikro Programmer to another USB port on your computer.
Consult Documentation: Refer to the TBS Flash user manual or the DasMikro Programmer documentation for specific troubleshooting tips.
If none of these solutions work, consider reaching out to the support team for the TBS Flash or DasMikro Programmer for further assistance.
I installed the TBS Flash and plugged in the USB DasMikro Programmer. I opened the application but I can't connect the USB Programmer to the Com Port. The Device manager shows the USB Device using the Com 5 Port but won't connect when the Com 5 Port is selected and the Device Driver is installed.
It sounds like you are experiencing a connection issue between the TBS Flash application and the USB DasMikro Programmer via the COM port. Here are a few steps to troubleshoot the problem:
Ensure Proper Installation: Double-check that the TBS Flash software and the USB drivers for the DasMikro Programmer have been installed correctly. Sometimes a fresh installation may resolve connectivity issues.
Verify Device Manager Settings: Make sure the COM port number in Device Manager matches the one you're trying to connect to in the TBS Flash application. You could try changing the COM port number in Device Manager to see if that helps establish a connection.
Check for Conflicts: Ensure no other devices or applications are using the same COM port. Conflicts can prevent the software from establishing a connection.
Update Drivers: Search for any available updates for your USB driver and install the latest version.
Administrator Privileges: Run the TBS Flash application as an administrator to ensure it has the necessary permissions to access hardware components.
Try Another USB Port: Sometimes the issue might relate to the USB port itself. Try connecting the USB DasMikro Programmer to another USB port on your computer.
Consult Documentation: Refer to the TBS Flash user manual or the DasMikro Programmer documentation for specific troubleshooting tips.
If none of these solutions work, consider reaching out to the support team for the TBS Flash or DasMikro Programmer for further assistance.